Re: [foxboro] Cyan displays...

Jaime
Loaded graphics does it. you probably are hitting on the limits of the om
space. this could be omlists, or om objects.
although cp40 has a lot of space in this respect, you may still be hitting
on its toes. 
remember this has nothing to do with the control. the om manager has its own
spaces in memory and portion of the scan time.

a problem that can happen is that the space of the om is used by dead lists.

you can use rsom to examine the omlist in the CP, and check that all poins
are scanning.
rebooting that station that is causing the dead list, will free that list.

regards,
maurice


> -----Original Message-----
> From: Jaime Claramunt R. (Inforsa) [SMTP:jclaramunt@xxxxxxxxxxxxxxx]
> Sent: 26 November, 2003 16:22
> To:   foxboro@xxxxxxxxxxxxx
> Subject:      [foxboro] Cyan displays...
> 
> Hi list,
> 
> Say, I remember you've been discussing about some cyan values on screen
> displays...but I don't recall the actual issue...
> I had something similar: some of the values on some of the displays appear
> in cyan with no values, but all the conections and overlays and commands
> were working fine (in all WPs). After some operations, openning, closing,
> changing displays, the problem was "solved".
> We saw that te CP free memory is quite low (CP40A FT), and when openning
> some of these displays the amount was reduced.
> Control charge is not so high (70-75), phasing seems Ok, maybe CP damaged
> ?
> too much drawings on display ? 
> 
> Any suggestion ?
> 
> Thanks
> B.R.
> 
> Jaime Claramunt
> Automation Engineer
> INFORSA Paper Mill
> CHILE
>  
>  
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: