Re: [foxboro] Control Blocks missing in ICC Configuration on CP270

You need to remove those missing blocks from the CSA db before you can
add them back. 
Follow ALL the steps from HH980, not just the last ones.


Angel Corbera
Senior Service Engineer
Global Product Support
Invensys Process Systems
Foxboro, MA, USA 02035
To help ensure a new inquiry receives timely attention, please contact
IPS Global Product Support as listed below:
Telephone:  +1-866-746-6477 (USA, Canada)
            +1-508-549-2424 (Worldwide)
E-mail: ips.csc@xxxxxxxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Rocco Vanden Wyngaard
Sent: Thursday, September 25, 2008 6:26 PM
To: Foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Control Blocks missing in ICC Configuration on CP270

The problem:
Some Control Blocks are running in the CP270 and show-up in Select, but
are not in ICC.
Now, we can NOT add those 3 blocks back in the ICC because the CSA
Server doesn't allow duplicate names.
Listed below are the only methods I have found to try. Looking for a
quick and simple method to resolve this problem.
 
Solution#1 we tried with no results:
 
Delete blocks from CP/Add blocks to ICC:
The blocks will be deleted from the CP the first time you try to add
them back. The second time the blocks will be added successfully.
Detailed Steps:
Go to ICC, select CP0001, compound CMPND101 (the one with the extra 3
blocks)
Click on: Insert New Block, and type name: BLK1 This message will come
up:
   "CMPD00X:BLK1, E40 - COMPOUND OR BLOCK ALREADY EXIST, FAILED,
   Select CONTINUE to Proceed"
Two seconds after click on CONTINUE, the block goes to Cyan (seen from
Select), and at this moment is deleted from CP Memory.
Again, click on Insert New Block and type name: BLK1 This time the
command will be accepted. Continue editing parameters.
Follow the same procedure for BLK2, and BLK3.
The control databases are in sync now.
 
 
Solution#2 would like to try next: 
 
 (/opt/fox/bin/tools/db_sync), you can check the synchronization of the
CP, work file and CSA using 'check_db_sync' <CPLBUG>.  
 
 
Solution#3 trying to avoid:
 
Loadall fix:
I have experienced this twice before and have always done a Loadall in
order to fix it. That is the official fix according to Foxboro.
 
 

Have a Great Day

Rocco Vanden Wyngaard

Control Systems Engineer

Galloway Company

Direct Dial (920) 886-2316

rvwyngaard@xxxxxxxxxxxxxxxxxxx

 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or 
entity to whom they are addressed. Please do not copy it or use it for any 
purposes, or disclose its contents to any other person. Further, this e-mail 
and any associated files may be confidential and further may be legally 
privileged. This email is from the Invensys Process Systems business unit of 
Invensys plc which is a company registered in England and Wales with its 
registered office at Portland House, Bressenden Place, London, SW1E 5BF 
(Registered number 166023).  For a list of European legal entities within the 
Invensys Process Systems business group, please click here 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.

If you have received this e-mail in error, you are on notice of its status. 
Please notify us immediately by reply e-mail and then delete this message from 
your system. Thank you for your co-operation. You may contact our Helpdesk on 
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail 
and any attachments thereto may be subject to the terms of any agreements 
between Invensys (and/or its subsidiaries and affiliates) and the recipient 
(and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: