Re: [foxboro] Control Blocks missing in ICC Configuration on CP270

Alex,

I know you say to request your write-up off-list, but this is a special
request.

Anybody wants to take what Alex offers and roll it into a Wiki page on
thecassandraproject.org? Somebody? Anybody?

Duc


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Johnson, Alex P (IPS)
Sent: Thursday, September 25, 2008 9:29 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Control Blocks missing in ICC Configuration on
CP270

The most likely explanation is that you restored your CP's host from an
out of date backup. This will leave the work file (the source of ICC's
data) and the CP out of sync.

Resolving the out of sync issue is non-trivial. I'll send you a write-up
off-line that might help. I've offered it before and the only condition
is that you request it off-list. If you request it on-list, I won't send
it to you.



Regards,
 
Alex Johnson
Invensys Process Systems
10900 Equity Drive
Houston, TX 77041
713 329 8472 (desk)
713 329 1600 (operator)
713 329 1944 (SSC Fax)
713 329 1700 (Central Fax)
alex.johnson@xxxxxxxxxxxxxxxx



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: