If you just want to generate a report of block names and the values they reading use /opt/fox/bin/tools/getpars=20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Penndorf, Rocco (RP) Sent: Tuesday, April 26, 2005 5:31 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Control Block Equivalents Almighty list, can somebody give me a hint where to find a table, what shows the control block name with its related block equivalent value.=20 I searched FoxDoc but wasn't successful so far. Thank You Rocco Penndorf ________________________________________________________________________ _____________________________________________________ Sr. Process Control Engineer / Acrylic Acid Plant DOW - Boehlen Tel.: +49 (0) 34206-8-7524 Fax: +49 (0) 34206-8-7522 E-Mail: rppenndorf@xxxxxxx =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave