Re: [foxboro] Connecting Limitorque & Integrator 30

Are you writing directly to the Modbus devices by filling in the IOM_ID and
point #'s in the GDEV and MOVLV blocks, or are you writing to the devices
through COUT, AOUT, or MCOUT blocks?  There are probably several
permutations you can try.

Stephen T. Woodworth
FeedForward, Inc.
1341 Canton Road, Suite H1
Marietta, GA 30066
770.426.4422
mailto:swoodworth@xxxxxxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of DOUGLAS NAVARRO
Sent: Wednesday, November 28, 2001 9:33 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Connecting Limitorque & Integrator 30




Does anybody have any experience connecting Limitorque's two wire valve
system (with UEC
and Six Relay Board units) via an I/A Series Integrator 30 for modbus ?

We are trying to configure an Integrator 30 to be connected to the DCS port
of a  DC100 master
station for Limitorque's two wire system. We are using the MOVLV and the
GDEV blocks to configure
valves and pumps respectively, but we have encountered a problem with
sending commands
to the SRB units whose 6 relays(K1 throuhg K6)  are commanded by the modbus
06 command
(Preset single register) instead of the 05 command (Force single coil)
which is used for UEC units.
As far as I can see the output of the MOVLV and GDEV blocks are boolen
values suited for the
05 command and not an integer value which would be required for the 06
command.

I would appreciate hearing from anyone who has tackled this situation
before.

Regards,
Douglas





***************  PDVSA4S INTERNET E-MAIL USE  ***************
This message may contain information solely  of the interest of PDVSA or
its businesses. Copying,  distribution,  disclosure  or any  use  of the
information   contained  in  this  transmission  is  permitted  only  to
authorized  parties. If you have  received this e-mail by  error, please
destroy it and notify webmaster@xxxxxxxxx or the sender by reply email.

******  USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET  ******
Esta nota puede contener informacion de interes solo  para  PDVSA o  sus
negocios. Solo esta  permitida su  copia, distribucion  o uso a personas
autorizadas. Si recibio esta  nota  por  error,  por  favor destruyala y
notifique al remitente o a webmaster@xxxxxxxxxx



___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: