Re: [foxboro] Configurator Help

  We have a few blocks linked to blocks in other CPs.  The problem we have
is that quite often the link does not get made after initially configuring
it in the Integrated Control Configurator.  The link shows up in the block
detail with the correct CBP, but it will be in cyan and shows out of
service.

  When this happens I have to checkpoint the CP two or three times to get
the link to work.  We used to call Foxwatch about this problem, but were
never able to get it resolved.

  The link problem usually happens when a CP in one node of our three node
carrier band LAN is linking to a CP in another node.

  As long as you enter the correct Compound:Block.Parameter it should work,
but you may have to open the block in the ICC, save it, and run a checkpoint
a few times before the link works.  Be sure that you enter the FULL C:B.P or
it definitely won't work.

Steve Murray
Asarco

-----Original Message-----
From: ShaunBenetti@xxxxxxxxxxxxx [mailto:ShaunBenetti@xxxxxxxxxxxxx]
Sent: Friday, July 11, 2003 09:03
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Configurator Help


I am using IA ver=2E 4=2E3 and am having some trouble=2E  I am trying to
send an analog output to a point located in a different compound and
CP than where the input and other logic resides=2E  I normally do not
do this but don't have a choice this time=2E  When I configure the
block It does not see the measurement=2E  Is there anyway I can do
this?  Thanks for any help=2E

Regards,

Shaun =20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

*

This e-mail and any files transmitted with it are the property of Americas 
Mining Corporation and/or its affiliates, are confidential, and are intended 
solely for the use of 
the individual or entity to whom this e-mail is addressed. If you are not a 
named recipient or otherwise have reason to believe that you have received this 
message in error, 
please notify the sender and delete this message immediately from your 
computer. Any other use, retention, dissemination forwarding, printing or 
copying of this e-mail is 
strictly prohibited.  Although this email and any attachments are believed to 
be free of any virus or other defect that might affect any computer system into 
which it is 
received, and opened, it is the responsibility of the recipient to ensure that 
it is virus free and no responsibility is accepted by Americas Mining 
Corporation and/or its 
affiliates for any loss or damage arising in any way from its use

This e-mail has been scanned and cleared by MailMarshal 
www.marshalsoftware.com

*
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: