Re: [foxboro] Comparing Compounds for changes

You can load the first SaveAll directly into FoxCAE 4.0 or 4.2 if the
saveall is from NT. For UNIX you can use the transfer utilities to
produce a FoxCAE diskette.
After loading and saving the first diskette, you just load the second
and will get a comparison before saving the changes to FoxCAE.

Stephan Meyer
CAE-Tools, Inc.
781 784 3368


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Balmer, Robert D.
Sent: Friday, October 19, 2001 12:12 PM
To: 'Foxboro DCS Mail List'
Subject: [foxboro] Comparing Compounds for changes


Hello List
Does anyone know how to compare two saveall of the same compound to find
differences? Maybe in FoxCAE?
Robert Balmer
Systems
Climax Molybdenum
Ft. Madison Iowa

 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave


 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: