Re: [foxboro] Communication problem b/w FBM231 & AB PLC

Imran,

You need to know which CAM you have.  There will be an AB part number
on the device your serial cable from the Foxboro switch block plugs in
to.  What is it?

Regards,

Kevin FitzGerrell

On 9/12/07, Imran Waheed Butt <butt.imran@xxxxxxxxx> wrote:
> Dear Scott,
> I have that document and I followed that and switch setting which you
> provide does not work and we don't know the modem numebr but the modem is
> also of AB and AB PLC is PLC 5/40 and it is connect to CAM or Modem by DH+,
>
> and we configured the .XML file as
>
> Port 1
> Mode= RS-232
> Baud Rete=9600
> Parity= none
> stop bits=1
> databits=8
> driver=DHPlus/CRC
>
> Kindly guide me.
>
> Thanks and Rgds
> Imran Butt.
>
>
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: