Re: [foxboro] Checkpoint Failure?

----- Original Message -----
From: "Douglas G. Lloyd" <DGLControls@xxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Thursday, November 06, 2003 8:48 PM
Subject: Re: [foxboro] Checkpoint Failure?


> Ashley,
>
> The checkpoint error code you describe is very common.  Years ago, I tried
> unsuccessfully to get some explanation of what it means from Foxboro SDE
> (Alex, any clue?).  When it occurs, just try the checkpoint again until it
> gives no error message.  The ICC will automatically checkpoint the station
> when you exit (or try to), if you've made changes and haven't already done
> so through the menu picks.
>
> By the way, I've never seen any adverse affects from this error message.
> Also, you can check the date of the last successful checkpoint by looking
at
> the /usr/fox/sp/file/DB<lbug>.UC file mentioned by another responder.
This
> file will be on the host AW for the control station.  Interesting to note:
> this file date is NOT necessarily the same as the date reported on the
> STATION display!  The STATION display apparently reports the date of the
> last attempted checkpoint, even if it was not successful?
>
> Regards,
>
> Doug Lloyd
> DGL Controls
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On
> Behalf Of Ashley Davey
> Sent: Thursday, November 06, 2003 5:09 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] Checkpoint Failure?
>
> Hi List
>
> A checkpoint initiated from inside (menu pick) the ICC of Ver4.3 on
> Solaris returned this message:
>
> Checkpoint
> Type 5; Class 8
> Code -25
> Failed
>
> The ICC was running on the AW hosting the CP.
> However, when the ICC was exited it appeared to execute a checkpoint
> without errors.
> Re-opening the ICC was not a problem.
>
> This raises the following questions:
> 1. Was the checkpoint carried out on exiting the ICC?
> 2. How would I check?
> 3. What might have caused the initial error?
>
> Any assistance will be appreciated.
> Regards
>
>
> Ashley Davey
> Systems Engineer
> African Products (Pty) Ltd
> Gauteng, RSA
> Tel : +27 11 458 5342
> Fax : +27 11 458 5343
> Mobile: +27 83 4535169
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: