Re: [foxboro] Can we connect Legacy 100 series FBM to ZCP270 or FCP270

I know that when we connect certain migration FBMs for Honeywell, Fisher, 
Bailey, SPEC200 and SPEC200 Micro, the controllers will be compatible. This is 
because most of these cards use the same IOM files as 100 Series. But the 
higher density migration FBMs and the SPECTRUM migration cards use 'parent' 
FCBs. These cards were ignored in the initial release of CP60 but included some 
time later after an "OH, S**T" revelation. Will these controllers also ignore 
these FBM types, or will these FBMs be included in the FCP270 and ZCP270 along 
with Westinghouse and APACS migration (200 Series like) migration FBMs? I have 
a couple migration project decisions riding on this capability. It's either 
going to be all MESH or I'll have to go back to CP60s.

        -----Original Message----- 
        From: Kevin FitzGerrell [mailto:fitzgerrell@xxxxxxxxxxxxxxx] 
        Sent: Sat 2/11/2006 5:47 AM 
        To: foxboro@xxxxxxxxxxxxx 
        Cc: 
        Subject: Re: [foxboro] Can we connect Legacy 100 series FBM to ZCP270 
or FCP270
        
        

        FCP270 can connect to either 100 or 200 series FBMs, but not both at the
        same time.  Can connect to up to 64 100 series FBMs.
        
        ZCP270 cannot connect to 100 series FBMs yet, but that capability has
        been promised soon (I/A 8.2?).
        
        Regards,
        
        Kevin FitzGerrell
        Carter Holt Harvey, Ltd.
        +64 27 460 9994
        
        Imran Butt wrote:
        > Dear All,
        > I have a query that can we connect the legacy 100 series FBM to 
ZCP270 or
        > FCP270 and if we can then HOW.
        >
        > Best Regards,
        > Imran Butt
        > System Engineer
        > Manstock Engineering Company (Pvt.) Ltd.
        > 39-42 Farid Chambers, Abdullah Haroon Road
        > Karachi - 74400, Pakistan
        > TEL: +92-21-5678952, 5678953, 5673145
        > FAX: +92-21-5682576
        > Cell: +92-321-2102686
        > E-mail: imran.butt@xxxxxxxxxxxxxxxxx
        > URL: http://www.manstock-engg.com
        >
        >
        >
        > 
        > 
        > 
_______________________________________________________________________
        > This mailing list is neither sponsored nor endorsed by Invensys 
Process
        > Systems (formerly The Foxboro Company). Use the info you obtain here 
at
        > your own risks. Read 
http://www.thecassandraproject.org/disclaimer.html
        > 
        > foxboro mailing list:             
http://www.freelists.org/list/foxboro
        > to subscribe:         
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        > to unsubscribe:      
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
        > 
        >
        >
        
        
        _______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys Process
        Systems (formerly The Foxboro Company). Use the info you obtain here at
        your own risks. Read http://www.thecassandraproject.org/disclaimer.html
        
        foxboro mailing list:             http://www.freelists.org/list/foxboro
        to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
        to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
        
        
        

-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: