Yes. The tool /opt/fox/bin/tools/som can examine the local import table. The 'imp' command will show it. 'help' will summarize one set of commands. 'more help' (after a help) gives a summary of the OM commands. Regards, Alex Johnson System Products - Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> Come to the Invensys Showcase: http://www.invensysshowcase.com/ <http://www.invensysshowcase.com/> -----Original Message----- From: Ajay_Tathgir@xxxxxxx [SMTP:Ajay_Tathgir@xxxxxxx] Sent: Thursday, May 09, 2002 2:10 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Calculations IND block Going slightly off the track, a query on the IMPORT table. - is it possible to have a look at what the import table is holding at any point of time Thanks & Regards Ajay Tathgir Reliance Industries Limited Mumbai - India _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave