Re: [foxboro] CP60 will not boot

What do the system monitor messages tell you?
Create a smon_log file in /opt/fox/sysmgm/sysmon (if this directory doesn't
exist use the mkdir command to do this)
Use tail -f smon_log to see what happens.
I've seen that the LBUG identification fails.

good luck!

Sven Audenaert
Service Engineer

Invensys Systems N.V./S.A.
Kontichsesteenweg 54 
2630 Aartselaar - Belgium
T: +32 (0)3 205.14.45 F: +32 (0)3 232.17.98

sven.audenaert@xxxxxxxxxxxxxxxx - www.invensys-systems.be

F o x b o r o * S i m S c i * T r i c o n e x * W o n d e r w a r e

 

> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx 
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Doucet, Terrence
> Sent: woensdag 14 september 2005 15:51
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] CP60 will not boot
> 
> David,
> 
> Did you check the real simple thing first -  SMDH - perhaps 
> someone = disabled download capability for the CP.
> 
> Terry
> 
> -----Message d'origine-----
> De=A0: foxboro-bounce@xxxxxxxxxxxxx =
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] De la part de Boulay, Russ
> Envoy=E9=A0: September 14, 2005 9:47 AM
> =C0=A0: 'foxboro@xxxxxxxxxxxxx'
> Objet=A0: Re: [foxboro] CP60 will not boot
> 
> First thing to try and verify if it is your checkpoint file:
> 
> Make copy of your checkpoint file.  DBLBUG.UC  DBLBUG.dave 
> Then copy the resident backup checkpoint file BBLBUG.UC to 
> DBLBUG.UC Try reboot If no reboot...then copy the DBLBUG.init 
> to DBLBUG.UC Try reboot...
> If no reboot....then it's not your checkpoint file. (put DBLBUG.dave =
> back)
> 
> You may have 2 hosts that are inadvertently trying to boot 
> the CP60 Check for CMXLBUG.BIN file for that CP60 on more 
> than one host.
> 
> Also run the utility /usr/fox/swi/ds_stasict LBUG  to be sure 
> the CP60 = is pointing to all the correct image files and and 
> checkpoint files.
> 
> And of course the sum of the OS1C60 compared to other hosts 
> that you may have on your system, to verify that the actual 
> image is ok.
> 
> There are more....but you can start there.
> 
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx 
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] = On Behalf Of David Johnson
> Sent: Wednesday, September 14, 2005 9:19 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] CP60 will not boot
> 
> Hello all,
> 
> I attempted to reboot a CP60 yesterday (on purpose) and the 
> CP will only =
> 
> come back to the red-green boot indication.  I tried swapping 
> another = CP60=20 with the same letterbug in its place and 
> had the same result.  = Everything=20 was working prior to 
> the reboot, ICC, FBMs, so the rack and cabling,  = seem=20 
> good.  I think I might have a corrupted boot file.  Assuming 
> I have a=20 recent save-all, what is the best way to handle this.
> 
> Regards,
> David Johnson
> 
> =20
> =20
> ______________________________________________________________
> _________
> This mailing list is neither sponsored nor endorsed by 
> Invensys Process Systems (formerly The Foxboro Company). Use 
> the info you obtain here at your own risks. Read 
> http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list:             
> http://www.freelists.org/list/foxboro
> to subscribe:         =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:      =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
> =20
> 
> =20
> =20
> ______________________________________________________________
> _________
> This mailing list is neither sponsored nor endorsed by 
> Invensys Process Systems (formerly The Foxboro Company). Use 
> the info you obtain here at your own risks. Read 
> http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list:             
> http://www.freelists.org/list/foxboro
> to subscribe:         =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:      =
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
> =20
>  
>  
> ______________________________________________________________
> _________
> This mailing list is neither sponsored nor endorsed by 
> Invensys Process Systems (formerly The Foxboro Company). Use 
> the info you obtain here at your own risks. Read 
> http://www.thecassandraproject.org/disclaimer.html
>  
> foxboro mailing list:             
> http://www.freelists.org/list/foxboro
> to subscribe:         
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>  
> 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: