Re: [foxboro] CP60 ENVIRONMENTAL SPECIFICATIONS

All X and Z modules are rated for GENERAL PURPOSE only, not harsh. You =
must have a sealed enclosure and take care of the generated heat in the =
box. You can find the BTU requirements in the installation guide. I =
suggest mounting in a GP environment and use the remote Fieldbus =
capability.

-----Original Message-----
From: Imran Butt [mailto:butt.imran@xxxxxxxxx]
Sent: Friday, April 22, 2005 8:14 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] CP60 ENVIRONMENTAL SPECIFICATIONS

Can any one tell me the Enviromental specifications of CP60 because it =
didn't specify in the PSS.
also if we have to install it at Class G3 (Harsh) Enviroment then what =
enclosure must be used.
Thanks & best rged,


Imran Butt,
System Engineer.


_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: