Re: [foxboro] CP40B


Yes CP40A keep on running without any problem. You can use either of the CP40
after installing B package software.

Use the latest image (version V2K_01) of CP40B available from CSC.

Best regards

Harshad




Stefano Persico <spersico@xxxxxxxxx>@freelists.org on 12/13/2001 05:00:00 AM

Please respond to foxboro@xxxxxxxxxxxxx

Sent by:  foxboro-bounce@xxxxxxxxxxxxx


To:   Foxboro DCS List <foxboro@xxxxxxxxxxxxx>
cc:
Subject:  [foxboro] CP40B



Hi list

a strange question 4 u
I've to add a new CP40B in an existing 6.1.1 node with CP40A modules
From Installation Notes of B modules i understand that in sys def the
new B module has to be defined as an A one and after committal just tar
the B package software disk.
After this procedure does my CP40A modules still run as A modules ???

Thanks



___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave




 
 
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist

list info:   http://www.freelists.org/list/foxboro
subscribe:   mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: