Re: [foxboro] CP40A largest segment of free memory too small

Can you re-boot the CP? If not I think you are out of luck. I had a similar
problem and have had to chop the sequence block into smaller parts.

mk

> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Moore, Kenneth,
> Celanese/US
> Sent: Wednesday, February 21, 2007 1:20 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] CP40A largest segment of free memory too small
>
>
>  Hi List,
> By kind, I'm just a novice.
> I have an Independent Sequence Block, that has a tremendous amount of
> HLBL, roughly 20 pages.
> I need to alter the logic slightly, everything compiles okay, when I go
> to save it, I get error E-35, not enough memory for block, the new logic
> is approx. 1/2 page shorter than the old logic.
> I don't know how the memory is handled through the ICC. The station
> block shows that the largest segment is 11008 bytes, with total free
> being 390648 bytes. Idle time is approx. 50%
>
> I suspect my problem is the size largest segment. How can I "re-arrange"
> the memory to have a larger segment available?
>
>
> Regards,
>
> Ken Moore
> Celanese Emulsions
> Enoree, SC 29335
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: