Re: [foxboro] CP40A largest segment of free memory too small

Individual modules do not reboot from the checkpoint file. They
re-marry. A re-marry is the copying of memory from one to the other
exactly so that Fault-Tolerance will work.

Thus, a single module reboot followed by a second one will not help.

Regards,
 =

Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Moore, Kenneth, Celanese/US
Sent: Thursday, February 22, 2007 5:22 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP40A largest segment of free memory too small

The block was 12000 plus before the edit, I guess when I increased
CSPACE to 15000, there was enough nearby memory to allow the approx. 3k
increase. I'm just glad it worked, because a CP reboot would not be
possible until sometime mid-March.
One quick question on your reboot recommendation, this is a fault
tolerant pair, will rebooting each CP individually, (not disturbing the
process) result in the same memory optimization? If so I could do this
anytime the process isn't at a critical stage.




Ken Moore
Celanese
Enoree, SC 29335




-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Johnson, Alex P (IPS)
Sent: Wed 2/21/2007 7:40 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP40A largest segment of free memory too small
 =

Ken,

You wrote earlier that the "largest segment is 11008 bytes" and you
state now that the block requires 13487 bytes.

At this point, the only options are:

1) Checkpoint the CP and reboot it. You do not need to upload and
initialize as one writer said. The CP repacks its RAM on reboot.
2) Split the block into two blocks each smaller than 11008 bytes.

The CP does not do "garbage collection." All it can do for memory
management is try to fit blocks into space left by previous deletions.
Once a block gets too big for the biggest available space, it cannot be
added.

I hope that this information is of some benefit.

Regards,

Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Moore, Kenneth, Celanese/US
Sent: Wednesday, February 21, 2007 4:30 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP40A largest segment of free memory too small

 CSPACE was 0, Changed to 15000, check pointed, same error.
 Trimmed the message strings approx. 40%, same error.
 Deleted and undeleted IND block, compiled, and done, without error.
 SUCCESS!!!!

I think once I changed CSPACE to 15000, it didn't do anything until the
delete/undelete.
Now detailed display shows CSIZE 13487 and CSPACE 15000


Regards,

Ken Moore

Celanese Emulsions
Enoree, SC 29335


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of tom.vandewater@xxxxxxxxxxxxxx
Sent: Wednesday, February 21, 2007 3:59 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP40A largest segment of free memory too small

Ken,
        I just remembered one more potential gotcha on the sequence
compiler error.  I remember running into a limit on the amount of text
characters that the compiler can handle when using the SENDMSG command
in the code.  If you have defined a large amount of SENDMSG character
strings in your code the compiler chokes and gives an error message that
isn't very descriptive such as the one you listed in your note.  You
could shorten each of your SENDMSG strings or remove some of the
messages entirely and see if it solves your problem.  It would be
appreciated if you respond to the list with whatever you find to be your
solution.
Thanks,
Tom VandeWater

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Moore, Kenneth, Celanese/US
Sent: Wednesday, February 21, 2007 1:20 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] CP40A largest segment of free memory too small

 Hi List,
By kind, I'm just a novice.
I have an Independent Sequence Block, that has a tremendous amount of
HLBL, roughly 20 pages.
I need to alter the logic slightly, everything compiles okay, when I go
to save it, I get error E-35, not enough memory for block, the new logic
is approx. 1/2 page shorter than the old logic.
I don't know how the memory is handled through the ICC. The station
block shows that the largest segment is 11008 bytes, with total free
being 390648 bytes. Idle time is approx. 50%

I suspect my problem is the size largest segment. How can I "re-arrange"
the memory to have a larger segment available?


Regards,

Ken Moore
Celanese Emulsions
Enoree, SC 29335

=3D3D3D20
=3D3D3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D3D3D20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =3D3D3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Djoin
to unsubscribe:      =3D3D3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3D3Dleave
=3D3D3D20
=3D3D20
=3D3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D3D20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =3D3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin
to unsubscribe:      =3D3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave
=3D3D20
 =3D

 =3D

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =3D

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
 =3D




Confidentiality Notice:
The information contained in this electronic message and any
attachment(s) =3D
to this message are intended for the exclusive use of the recipient(s)
and =3D
may contain confidential, privileged or proprietary information. If you
are=3D
 not the intended recipient, please notify the sender immediately,
delete a=3D
ll copies of this message and any attachment(s). Any other use of the
E-Mai=3D
l by you is prohibited.


 =

 =

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
 =



-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat


 =

 =

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
 =




Confidentiality Notice:
The information contained in this electronic message and any attachment(s) =
to this message are intended for the exclusive use of the recipient(s) and =
may contain confidential, privileged or proprietary information. If you are=
 not the intended recipient, please notify the sender immediately, delete a=
ll copies of this message and any attachment(s). Any other use of the E-Mai=
l by you is prohibited.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: