Re: [foxboro] CP Phasing

Check out B0193AW Integrated Control Software Concepts, Section 7, Block
Processing ...

Joseph M. Riccardi
DCS Services - Industrial Process Controls
www.eRiccardi.com
Joe@xxxxxxxxxxxxx


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =
On
Behalf Of Rick Mol
Sent: Tuesday, October 14, 2003 4:47 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] CP Phasing


Greetings, All Wise and All Knowing List.
=20
We have some CP40s that are getting busy. =20
=20
Is there a good document that explains block, compound and ECB phasing
floating around out there?
=20
It's been a while since I've had to deal with any of it.
=20
Thanks and Regards,
=20
=20
=20
Rick Mol
ESCO Company
IT/Automation Admin.
231.727.6409
rdmol@xxxxxxxxxxxxxxx

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at =
your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: