Re: [foxboro] CP Loading
- From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Thu, 6 Jan 2005 18:07:00 -0500
Get the CP sizing spreadsheet and enter the data for your CP. The refs
toolkit on the Cassandra web site has an output mode that can help.
The sizing spreadsheet is in the standard documentation on the TAC web site.
The family of spreadsheets can be found in the Planning section.
B0193BF G Allen-Bradley Gateway Spreadsheet (.xls) 03/30/01 49 KB
B0193BF G Allen-Bradley Station Spreadsheet (.xls) 03/30/01 47 KB
B0193BF G Control Processor 10 (CP10) Spreadsheet (.xls) 03/30/01 81 KB
B0193BF G Allen-Bradley Integrator Spreadsheet (.xls) 03/30/01 50 KB
B0193BF G Control Processor 30 (CP30) Spreadsheet (.xls) 03/30/01 123 KB
B0193BF G Control Processor 40 (CP40) Spreadsheet (.xls) 03/30/01 124 KB
B0193BF G INTERSPEC Integrator Spreadsheet (.xls) 03/30/01 63 KB
B0193BF G Modicon Gateway Spreadsheet (.xls) 03/30/01 49 KB
B0193BF G Modicon Integrator Spreadsheet (.xls) 03/30/01 50 KB
B0193BF G Instrument Gateway Spreadsheet (.xls) 03/30/01 51 KB
B0400BK C Control Processor 60 (CP60) Sizing Guidelines and Excel Workbook
10/04/02 524 KB
B0400BK C Control Processor 60 (CP60) Spreadsheet (.xls) 10/04/02 327 KB
Other documents there include:
B0193AB V Site Planning 03/28/03 4.4 MB
B0193BF G System Planning and Sizing 03/30/01 1.1 MB
B0193UU F European Union CE-Mark Compliance Manual 03/30/01 744 KB
B0193UX H Network Cable Systems Planning 03/28/03 1.4 MB
If you mean on-line, you can use the station block. You can build a graphic
that shows the data for all of your CPs on one page and you can configure it
to turn collection on and off.
Hope this helps.
Regards,
Alex Johnson
Invensys Process Systems
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (voice)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of BrianLong
Sent: Thursday, January 06, 2005 5:30 PM
To: Foxboro
Subject: [foxboro] CP Loading
Does anyone have a good rule of thumb to check CP loading without spending
lots of time.
Thanks,
Brian
AKD
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
