Re: [foxboro] CP Error protocol

Dear Shaum,
Our connection between PLC and DCS is done by a MICRO I/O not by a FBM224. 
Do you think this can be the cause of the problem?
----- Original Message ----- 
From: "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Monday, October 16, 2006 10:07 PM
Subject: Re: [foxboro] CP Error protocol


> Daniele
> This may not be of much help but we get
> K0MG03 Error Protocol FTXSS 000080 Memory violation occured 00006C09A05F
> On an intergrator 30 for Modbus Pluss, it happens when another device on
> the MB+ network sends a command to the Gateway. (eg network device
> discovery scan)
> It looks like you are having the problem with a CP60 but you mention a
> PLC so there must be a ?FBM224.
> In our case the gateway memory dumps and takes 10 minutes to come back
> online
> Shaun
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Daniele Tocco
> Sent: Tuesday, 17 October 2006 05:57
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] CP Error protocol
>
> Hi all it is already 3 time that I got problems with one CP of the
> plant.
> It seems that the CP looses the comunication with the I/O interfaces.
> The syslog error is the following:
>
> CP6002 Error protocol FTXSS 00080 Memory violation occurred 00006C17130F
> CP6002 Error protocol FTXSS 00080 Memory violation occurred 00006C171B68
> CP6002 Error protocol FTXSS 00080 Memory violation occurred 00006C17130F
> CP6002 Error protocol FTXSS 00080 Memory violation occurred 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> CP6002 Error protocol 1     1 No Msg found 00006C171B68
> AW7001 Process=3DNFD000001 NF8023-00001 NB Cable test to WP7002 OK. No
> response from CP6002
>
> There is also a MC I/O error that has been logged 13 minutes before
> this. It trasduces the PLC signals in DCS signals. Could be this device
> too to create the out of service of CP6002?
>
> Somebody can give me some hints?
>
> Thank you very much
>
> Daniele
>
>
> =20
> =20
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> =20
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
> =20
>
>
> =0A=0ANOTICE - This message and any attached files may contain informatio=
> n that is confidential and intended only for use by the intended recipien=
> t. If you are not the intended recipient or the person responsible for de=
> livering the message to the intended recipient, be advised that you have =
> received this message in error and that any dissemination, copying or use=
> of this message or attachment is strictly forbidden, as is the disclosur=
> e of the information therein. If you have received this message in error =
> please notify the sender immediately and delete the message.
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
> 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: