Re: [foxboro] CAD, AM Match "Point Name"

From: "Doucet, Terrence" <tdoucet@xxxxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Date: Tue, 20 May 2008 09:49:05 -0400

Per B0193AX  MEALM Block  - Point Name is a user-defined string, input
acting as a point descriptor label.

Terry


: [foxboro] CAD, AM Match "Point Name"

Hi,

could someone point me to an explanation of "Point Name" in the Current
Alarm Display "Alarm Match"-Window.

The Foxdoc B0700AT_B.pdf doesn't explains it.

Does it mean "Point Name" =3D3D "Compound:Block"?

Regards,
Andreas
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

References:

[foxboro] Visual basic
From: Mostafa mohamed

[foxboro] AW: Visual basic
From: dweinbrenner

[foxboro] CAD, AM Match "Point Name"
From: Weiss, Andreas

Re: [foxboro] CAD, AM Match "Point Name"

Other related posts: