Re: [foxboro] Block going to Manual after AW reboot

From: "Weiss, Andreas" <Andreas.Weiss@xxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Date: Mon, 26 Nov 2007 02:05:45 -0600

Hi,

it may be that your Sequencecode doesn't uses Exception_Handlers and is
trying to send a Display Manager Command to the AW which isn't
available.

Regards,
Andreas
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

References:

Re: [foxboro] Fw: FBI10E Block not visible from SMDH
From: Summerville, David D

[foxboro] OKI Printer replacement
From: Kashif Ijaz

[foxboro] Block going to Manual after AW reboot
From: Kashif Ijaz

Re: [foxboro] Block going to Manual after AW reboot

Other related posts: