Re: [foxboro] Atlas Copco Air Compressors

Robert
We currently have a Atlas Copco MKIII Elektronkon connected to a Quaitum PLC 
via a dedicated Modbus link and then transfer the data to the I/A via a 
gateway. We had trouble getting it working but once setup works fine. Email of 
the list if you need some help???

Craig Rookes
Systems Engineer
Methanex New Zealand LTD
Ph 64.6.7549779
Email C.Rookes@xxxxxxxxxxxx

>>> rbalmer@xxxxxxxxxxxxxxx 01/21/03 08:17AM >>>
Has anyone on the list had any dealing with bringing Atlas Copco air
compressor information into the I/A system?
The  Atlas Copco MKIII Elektronkon units require a Modbus/Modbus Plus
through a Modbus bridge. The companies information goes into some detail,
but not at much length on the "how it is done". Just wondering if any of you
folks have been done this path.
Robert Balmer
Applications Analyst/Programmer
Fort Madison Iowa





_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: