Re: [foxboro] Alarms priority

Others have added PRIORITY to the Description field.  Bit of a task to =
get started.

In third party Alarm Management tools that read the serial port (alarm =
printer message) they can search for this number in a specific part of =
the description field and sort your alarms based on priority. And =
provide other statistics based on priority.

Terry

-----Message d'origine-----
De=A0: foxboro-bounce@xxxxxxxxxxxxx =
[mailto:foxboro-bounce@xxxxxxxxxxxxx] De la part de Jim Kahlden
Envoy=E9=A0: 21 f=E9vrier 2008 14:06
=C0=A0: foxboro@xxxxxxxxxxxxx
Objet=A0: Re: [foxboro] Alarms priority

We went through this same issue and our answer was to configure the =
Alarm =3D
Name (ANM) parameter in the blocks with the priority number.  Now when =
the =3D
alarm prints out it comes out Compound:Block.ANM  where the ANM contains =
=3D
the number 1 thru 5 depending on the alarm priority of the block.  This =
=3D
caused extra work, but it is one way to have the priority to print out.


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: