Re: [foxboro] Alarms priority

We went through this same issue and our answer was to configure the Alarm =
Name (ANM) parameter in the blocks with the priority number.  Now when the =
alarm prints out it comes out Compound:Block.ANM  where the ANM contains =
the number 1 thru 5 depending on the alarm priority of the block.  This =
caused extra work, but it is one way to have the priority to print out.


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx

>>> "Aymen LAZAAR" <aymen.lazaar@xxxxxxxxx> 2/21/2008 1:55 AM >>>
Hi,
I would like to know how we can configure the alarms priorities to be
printed in addition to the description. I believe somehow we can configure
whatever alarms attribute we want.

Thanks in advance for your help.

Regards,

Aymen


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html=20
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro=20
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
=20
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
=20

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: