The Alarm Configuration Report Utility from FeedForward, Inc. does a great job.=20 http://www.feedforward.com/almrep_downloads.htm Tommy Currie ctcurrie@xxxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Keith, Tommy Sent: Thursday, January 20, 2005 10:42 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Alarms Does anyone have a neat and clean way to extract alarm values other than using iccapi. I need to extract all alarm values from cps on three loaded nodes consisting of 10 cps to 22 cps. Tommy Keith Wellman Inc. Tommy.Keith@xxxxxxxxxxxxxx Phone 843-395-3565 Fax 843-395-3885 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave