Yep. It's not hard to setup. Regards, Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) alex.johnson@xxxxxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of stan Sent: Tuesday, June 21, 2005 3:37 PM To: Grace, Kathy Cc: Foxboro List Subject: Re: [foxboro] Alarm envrionments On Tue, Jun 21, 2005 at 11:29:32AM -0400, Grace, Kathy wrote: > RE: > I think Alex's suggestion of using the remote AM to view the alarms from the > other Unit would be the best approach for pre version 8 systems. > > How? This can be done for 8.0 but I have no idea how to do this for pre 8.0 > systems. Am I missing something? > My understanding of what Alex is sugestting is that I run an AM on a unit 1 WP (or AW), and have it's X DISPLAY envirnment variable set to poit to a unit 2 workstation. Is that correct Alex? -- U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror - New York Times 9/3/1967 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave