Re: [foxboro] Alarm Timestamps 1 hour in Future

Hello,

If the future timestamps are only occurring on AIM* historians as
Luciano suggested check the day light saving time settings.  In aim* you
can check the Collector Station CFG and see what DST is set to.  If you
save your aim* configuration to file you could grep for DST.  If you
have MESH then it can be really confusing as DST can be set for the
local time applet.  The AIM* 3.3 release notes has quite good
documentation on time.  But it still leaves me confused.  We still can
not get a unix node based aim* historian to display correctly on a
windows mesh foxview trend.

Sean
NZ Steel




NOTICE - This message and any attached files may contain information that is 
confidential and intended only for use by the intended recipient. If you are 
not the intended recipient or the person responsible for delivering the message 
to the intended recipient, be advised that you have received this message in 
error and that any dissemination, copying or use of this message or attachment 
is strictly forbidden, as is the disclosure of the information therein. If you 
have received this message in error please notify the sender immediately and 
delete the message.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: