Re: [foxboro] Alarm Silence on Common Group Alarm Panels at 8.4.2

Tom,

Answers to your questions:

Does this mean that we need to install QF1009910 on all of our CAG 8.2
boxes before we begin to install 8.4.2. on any of them? 
Yes.
Once you start the process of loading QF1009910 than all players need to
be at that QF level or at V8.4.2

As we install QF1009910 on some of the 8.2 CAG boxes will the
uninstalled 8.2 CAG boxes break the socket on the installed 8.2 boxes
until we have all at 8.2 with the QF intalled? 
Yes
Any V8.2 CAG member non-QF multicasting out onto the system to all CAG
groups will break that socket. Therefore affecting all CAG groups

Even though it is a pain, this solution makes it possible for us to
accomplish an upgrade to a mixed paltform 8.2 / 8.4.2.  Our problem is
that one of our boot hosts at 8.2 is a CAG member and we can't upgrade
it to 8.4.2 at this time because the CP's cannot be initialized and
rebooted as required by 8.4.2.  Without a QF at 8.2 that box would
constantly break the
8.4.2 CAG multicast sockets on the other boxes? 
Yes. 
So it would be a prime candidate to load the QF. Or make it a non CAG
workstation.



** Confidentiality Notice:
This e-mail, including any associated or attached files, is intended solely for 
the individual or entity to which it is addressed. This e-mail is confidential 
and may well also be legally privileged. If you have received it in error, you 
are on notice of its status. Please notify the sender immediately by reply 
e-mail and then delete this message from your system. Please do not copy it or 
use it for any purposes, or disclose its contents to any other person.

This email is from the Invensys Process Systems business unit of the Invensys 
Group, a group of companies owned by Invensys plc, which is a company 
registered in England and Wales with its registered office at Portland House, 
Bressenden Place, London, SW1E 5BF (Registered number 166023).  For a list of 
European legal entities within the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.  

You may contact Invensys plc on +44 (0)20 7821 3848 or e-mail 
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be 
subject to the terms of any agreements between Invensys (and/or its 
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and 
affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: