Re: [foxboro] Alarm Manager Configurator question

Tim,
The current version of AM/ADMC does not support configuring button colors.
Kathy

-----Original Message-----
From: Lowell, Tim: [mailto:Tim.C.Lowell@xxxxxxxxxxxxxxxxxx] 
Sent: Wednesday, May 14, 2003 10:37 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: [foxboro] Alarm Manager Configurator question


Either using the Alarm Manager Configurator, or editing the Alarm Manager
.cfg files by hand, can you make the color of the buttons on the bottom of
the screen change background color, based on the status of a block or if the
"Match Alarms" is in effect, for example?  

We have managed to configure a button that sets the "Match Alarms" to active
and filters out everything except Priority 1 alarms.  The little block of
text on the very bottom of the screen that says "Match Active" changes to a
red background when "Match Alarms" is in effect, but that is small and hard
to see.  We want the actual button to change background color.  Is this even
possible?

Tim Lowell
Control Systems Engineer
ConocoPhillips, Trainer Refinery
Phone:  610-364-8362
Fax:    610-364-8211
Tim.C.Lowell@xxxxxxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: