Re: [foxboro] AW70X SOFT CP NOT WORKING

If you look in your installation logs.....did the AFB70 software load
correctly? That is the Control I/O  software for the internal CP

The AW70X that you described is connected to the nodebus so the previous
email regarding the MS loopback adapter doesn't apply. You must be bound to
a legitimate Ethernet adapter.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Ali Ahmed
Sent: Friday, December 09, 2005 4:49 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AW70X SOFT CP NOT WORKING

Dear Pablo,
I faced a similar problem when I set up an AW70X on an I/A NT version 6.1. 
The ICC access problem was same as yours. I solved this problem by setting 
the driver of ethernet card to MS Loop back adapter.  I hope this can help 
you finding the direction towards your problem solution.

Thanks,
Ali Ahmed Zahidi
Pakistan Refinery


>From: "Pablo Lioi" <plioi@xxxxxxxxxxx>
>Reply-To: foxboro@xxxxxxxxxxxxx
>To: foxboro@xxxxxxxxxxxxx
>Subject: [foxboro] AW70X SOFT CP NOT WORKING
>Date: Fri, 09 Dec 2005 00:16:09 +0100
>
>Hi folks,
>I am setting up an AW70 w/control (AW70X) for training purposes, using I/A
>NT version 6.5.1.
>With Sysdef I defined a configuration containing a Nodebus Node, the AW70X
>and GW30. The AW connects to the Nodebus through a DNBT.
>I was able to program the GW30 with ICC, but I cannot access the "soft CP"
>with ICC.
>Every time I try to do so, an error message pops up: "AWCAP1 Communication
>to CP (-23) Failed. Select CONTINUE to proceed" (AWCAP1 is the AW70X
>letterbug). When I hit CONTINUE, another message pops up: "iuc_ or uc_open
>failed. Select CONTINUE to proceed" and after hitting CONTINUE again, I get
>the ICC Compound Selection screen. By the way, I think I should see the
>compounds AWCAP1_STA and AWCAP1_ECB in the list, but they are not there.
>In FoxSelect, the AWCAP1 station shows in red color.
>In SMDH the AWCAP1 station shows in normal state.
>
>Any ideas as to what may be the problems?
>Thanks,
>Pablo Lioi
>Systems Engineer
>TOTAL AUSTRAL - Argentina
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.com/

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: