As far as I know the iccdrvr.tsk is still supported as long as you are = using ICC. Why not try running it from the cmd line? cd /opt/fox/ciocfg/api and start it in interactive mode: iccdrvf.tsk then type: OPEN CPLBUG ALL root get * all close exit if this works then the driver task is probably working okay and there = might be a problem in the script you are passing. If this is the case = you can post the script and perhaps we can identify where the problem = is. thanks Peter -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Weiss, Andreas Sent: Tuesday, September 25, 2007 7:13 AM To: foxboro@xxxxxxxxxxxxx Cc: Koslowski, Frank Subject: Re: [foxboro] AW70 I/A V8.3 iccdrvr.tsk.exe problem > Are you still using ICC? >=3D20 Yes. > Or did you get sucked into the IEE or IACC product? >=3D20 No. It's better for my emotions to be happy instead of ... Andreas =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: http://www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave