Re: [foxboro] AW70 CSA

The only correct way to get this solved is:

Initialize the (internal) CP via ICC,
Reboot
Load All

Albert Clarisse


-----Original Message-----
From: Rick Mol [mailto:rdmol@xxxxxxxxxxxxxxx]
Sent: donderdag 12 september 2002 13:36
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AW70 CSA


A standalone AW70 soft CP used for development was initialized. When the old
saveall is loaded to it, the ICC api barks about the compound already
existing.  Foxselect still shows all the old compounds, even after clear and
reconnect.  

Checkpoint, reboot PC, swift kick, threats, etc.,  has been done.

If I remember correctly, there is a file that needs to be edited. Any ideas?

Regards,

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: