Re: [foxboro] AW51F and trackball

Several trackball options are shown on www.iastore.com.

You should also be able to get a part number from your account rep or the
CSC.

Regards,
 
Alex Johnson
Invensys Process Systems
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (voice)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Schouten, Frits JF
Sent: Thursday, January 27, 2005 9:18 PM
To: Foxboro DCS Mail List (E-mail)
Subject: [foxboro] AW51F and trackball

Dear all,
I've just run into an issue that turns out a bigger obstacle than initially
thought.

I'm in the process of upgrading of 2xWP30 to 1 dual screen WP51F.
I was told that the WP30 GCIO could not be reused with the WP51F, so we
purchased a new GCIO with the WP51F.

The problem we now encounter is that the new GCIO does not cater for a KBD
or a TRACKBALL.
It only supports a Annunciator and, if installed, a touch screen.

And there is no way an ordinairy ps2 mouse will be accepted in the control
room.

Is there actually a trackball ps2/usb/serial or otherwise available for a
WP51F?

Cheers,
Frits Schouten 
Process Computing Department 
New Zealand Steel Ltd
Mission Bush Rd Glenbrook
Private Bag 92121
Phone:   +64 +9 375 8111 ext 5261 
Email:   Frits.Schouten@xxxxxxxxxxxxxxxxxx 



EOM

NOTICE - This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this message
in error please notify the sender immediately and delete the message.


EOM

NOTICE - This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this message
in error please notify the sender immediately and delete the message.

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: