Re: [foxboro] AW51EX config

The AW letterbug and the CP image name must be the same.

That is, if the AW is AW0001, the CP image will be AW001 in things like =
the
Select display.

Regards,

Alex Johnson
Invensys
10707 Haddington
Houston, TX 77063
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx>=20
For the latest information on ArchestrA, go to
www.invensys.com/Archestra.html
<http://www.invensys.com/divisions/Archestra.html> .


        -----Original Message-----
        From:   Ashley Davey [SMTP:Ashley.Davey@xxxxxxxxxxxx]
        Sent:   Monday, January 20, 2003 5:14 AM
        To:     foxboro@xxxxxxxxxxxxx
        Subject:        Re: [foxboro] AW51EX config

        Hi,=20
        Here is an extract from the FOXDOC=20
        B0193JG, Rev H,  Chapter 2. Software Installation Procedures=20
        =AF-----------------------------------------------------------------=20
        To use the set_letterbug utility:=20
        Boot the AW in a stand-alone mode.=20
        Enter the VT100 local environment.=20
        Type the following (where <LBUG> is the desired letterbug):
             /usr/local/set_letterbug <LBUG>=20
        When the AW is booted while connected to a DNBI/DNBX, it
automatically assumes the letterbug in the DNBI/DNBX, overriding any
letterbug set with the set_letterbug utility. If an AW is booted =
stand-alone
after having been booted connected, it retains the letterbug it assumed =
when
booted connected until the set_letterbug utility is run again.=20
        If a stand-alone AW is to be connected to the Nodebus, it must be
rebooted after the physical connection is made. This allows the =
operating
system to confirm that the letterbug (contained in the DNBI/DNBX) is =
unique
within the system. An AW connected to the Nodebus without rebooting =
does not
communicate on the Nodebus.
        *********************************
        Regards



        Ashley Davey
        Software Engineer
        African Products (Pty) Ltd
        Gauteng, RSA
        Tel : +27 11 458 5342
        Fax : +27 11 458 5343

        >>> Jean-Christophe.MUTI@xxxxxxxxxxxxxx 20/01/03 11:32:28 AM >>>
        Hi list,
        Does anybody knows how to configure a particular name for the
Xcontroller.
        Example my station (aw51x) has a name PCAT00 (default name). But i
don't
        want to have the same name for the controller.
        By default it is the same. Any ideas ?

        thank u all








        -- No attachments (even text) are allowed --
        -- Type: image/gif
        -- File: guy1.gif


        -- No attachments (even text) are allowed --
        -- Type: image/gif
        -- File: jctalk.gif




=09
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html

        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave

        WARNING: This e-mail is being sent from African Products (Pty)
Limited, and is intended for the addressee named above. Any =
unauthorised use
or interception of this e-mail is illegal. The e-mail message or its
attachments may contain confidential or privileged information and may =
not
be copied, forwarded or disclosed to any unauthorised person. If you =
are not
the named addressee (or person responsible for forwarding the e-mail to =
the
addressee) please notify us immediately via return e-mail and destroy =
the
copy you have received. Save for bona fide company matters, African =
Products
(Pty) Limited accepts no responsibility for the opinions or the content =
in
this e-mail or its attachments.

        =20
        =20
=09
_______________________________________________________________________
        This mailing list is neither sponsored nor endorsed by Invensys
Process
        Systems (formerly The Foxboro Company). Use the info you obtain here
at
        your own risks. Read
http://www.thecassandraproject.org/disclaimer.html
        =20
        foxboro mailing list:
http://www.freelists.org/list/foxboro
        to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
        to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
        =20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: