Re: [foxboro] AW51EX config

Hi, 
Here is an extract from the FOXDOC 
B0193JG, Rev H,  Chapter 2. Software Installation Procedures 
¯----------------------------------------------------------------- 
To use the set_letterbug utility: 
Boot the AW in a stand-alone mode. 
Enter the VT100 local environment. 
Type the following (where <LBUG> is the desired letterbug):
     /usr/local/set_letterbug <LBUG> 
When the AW is booted while connected to a DNBI/DNBX, it automatically assumes 
the letterbug in the DNBI/DNBX, overriding any letterbug set with the 
set_letterbug utility. If an AW is booted stand-alone after having been booted 
connected, it retains the letterbug it assumed when booted connected until the 
set_letterbug utility is run again. 
If a stand-alone AW is to be connected to the Nodebus, it must be rebooted 
after the physical connection is made. This allows the operating system to 
confirm that the letterbug (contained in the DNBI/DNBX) is unique within the 
system. An AW connected to the Nodebus without rebooting does not communicate 
on the Nodebus.
*********************************
Regards



Ashley Davey
Software Engineer
African Products (Pty) Ltd
Gauteng, RSA
Tel : +27 11 458 5342
Fax : +27 11 458 5343

>>> Jean-Christophe.MUTI@xxxxxxxxxxxxxx 20/01/03 11:32:28 AM >>>
Hi list,
Does anybody knows how to configure a particular name for the Xcontroller.
Example my station (aw51x) has a name PCAT00 (default name). But i don't
want to have the same name for the controller.
By default it is the same. Any ideas ?

thank u all








-- No attachments (even text) are allowed --
-- Type: image/gif
-- File: guy1.gif


-- No attachments (even text) are allowed --
-- Type: image/gif
-- File: jctalk.gif




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

WARNING: This e-mail is being sent from African Products (Pty) Limited, and is 
intended for the addressee named above. Any unauthorised use or interception of 
this e-mail is illegal. The e-mail message or its attachments may contain 
confidential or privileged information and may not be copied, forwarded or 
disclosed to any unauthorised person. If you are not the named addressee (or 
person responsible for forwarding the e-mail to the addressee) please notify us 
immediately via return e-mail and destroy the copy you have received. Save for 
bona fide company matters, African Products (Pty) Limited accepts no 
responsibility for the opinions or the content in this e-mail or its 
attachments.

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: