Re: [foxboro] AW51E Mirror Backup on V6.5.1


Travis
The mirroDB backup is a dd backup of the raw mdb partition. This probably
not! What you need.
 You should do a full back-up of the drive to get everything

Regds
Graham heath
Invensys UK ltd


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Meredith, Travis ASE
Sent: 23 June 2005 14:43
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AW51E Mirror Backup on V6.5.1

Hi again List. I'm attemting a tape backup using an AIT2 tape and AIT2 tape
drive. The station is an AW51E on V6.5.1 with external mirrored hard drives.
First I checked the status of the mirrored drives and everything is OK.
Next, ran the "mirror_backup" and it appears to run with no problems. When
the backup is complete it tells me the operation was successful and to store
the tape away. The drives then re-mirror okay. But before I remove the tape
I enter a "ufsrestore tvfs /dev/rst9 1" to read the tape back and verify
that it's ok. I get the following message:

verify volume & initialize maps
media block size is 126
volume is not in dump format

This AW is on our simulator and is the only AW we have on V6.5.1. It's the
only station I'm having difficulties backing up. Has anyone experienced a
problem like this or maybe have any thoughts on something different I can
try?

Thanks,
Travis


Travis Meredith
DCS Programmer
Albian Sands Energy Inc
P.O. Box 5670, Fort McMurray, Alberta, T9H 4W1, Canada

Tel: +1 780 713 4797
Email: travis.meredith@xxxxxxxxxxxxxx
Internet: http://www.albiansands.ca


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: