Re: [foxboro] AW51B doesn't boot

 
 
You may need a new NVRAM. If the machine is more than 5 years old, the lithium 
battery may be gone. The NVRAM will need to be programmed for the original 
machine ID. PCS can supply programmed NVRAMs if needed.


 
 
Thank you,

Ken Heywood
Calibration Laboratory Manager

401 Industrial Drive
Plymouth MI 48170
http://www.processcontrolservices.com
KHeywood@xxxxxxxxxxxxxxxxxxxxxxxxxx
Telephone: 734-453-0620
Facsimile: 734-453-6008
Wireless: 508-241-2040
PCS means Providing Customer Satisfaction
 
--------------------------------------------------------------------------
PROCESS CONTROL SERVICES, INC. DISCLAIMER
This message (and any associated files) is intended only for the use of the 
individual or entity to which it is addressed and may contain information that 
is confidential, subject to copyright or constitutes a trade secret. If you are 
not the intended recipient you are hereby notified that any dissemination, 
copying or distribution of this message, or files associated with this message, 
is strictly prohibited. If you have received this message in error, please 
notify PCS immediately by replying to the message and deleting it from your 
computer. Messages sent to and from PCS may be monitored.

Internet communications cannot be guaranteed to be secure or error-free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses. Therefore, we do not accept responsibility for 
any errors or omissions that are present in this message, or any attachment, 
that have arisen as a result of e-mail transmission. If verification is 
required, please request a hard-copy version. Any views or opinions presented 
are solely those of the author and do not necessarily represent those of PCS.
--------------------------------------------------------------------------
 
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of kabir ahmed
Sent: Friday, May 15, 2009 5:52 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AW51B doesn't boot

Thanks alot Mark, It worked. as i am new to the system, could u tell me the 
possible causes for such problem and what exactly Control+C does in this 
circumstances. once again thabks to all who replied.
 
K A B I R  AHMED
________________________________






________________________________
From: "Gardner, Mark" <mark.gardner@xxxxxxxxxxxxxxxx>
To: foxboro@xxxxxxxxxxxxx
Sent: Thursday, May 14, 2009 8:57:41 PM
Subject: Re: [foxboro] AW51B doesn't boot

Kabir,
Try the following.
1. When you see the "auto-revarp" message, try 
  Hit the "control+c" keys at the same time to 
  Continue past the message.

If that doesn't work is it possible you need to set the NVRAM parameters to 
Defaults?
Mark


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of kabir ahmed
Sent: Thursday, May 14, 2009 11:41 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AW51B doesn't boot


Dear All,

I am a new user, we have AW51B that doesn't boot and reboot automatically,i 
have changed the Hard disk as well and checked the Ram as well, its sowing 
following message before it reboots:
Configuring network interfaces: le0
le0:auto-revarp failed : no RARP replies received
retrying host configuration

kindly suggest sloution,

With best regards,

Kabir Ahmed
I&C Engineer, PRL 
 
K A B I R  AHMED

________________________________


      


_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:            http://www.freelists.org/list/foxboro
to subscribe:        mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave



** Confidentiality Notice:
This e-mail, including any associated or attached files, is intended solely for 
the individual or entity to which it is addressed. This e-mail is confidential 
and may well also be legally privileged. If you have received it in error, you 
are on notice of its status. Please notify the sender immediately by reply 
e-mail and then delete this message from your system. Please do not copy it or 
use it for any purposes, or disclose its contents to any other person.

This email is from the Invensys Process Systems business unit of the Invensys 
Group, a group of companies owned by Invensys plc, which is a company 
registered in England and Wales with its registered office at Portland House, 
Bressenden Place, London, SW1E 5BF (Registered number 166023).  For a list of 
European legal entities within the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_idw&nav_id€&prev_idw.  

You may contact Invensys plc on +44 (0)20 7821 3848 or e-mail 
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be 
subject to the terms of any agreements between Invensys (and/or its 
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and 
affiliates).




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:            http://www.freelists.org/list/foxboro
to subscribe:        mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave


      
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: