Re: [foxboro] AW51B boot problem

Jim,
This fixed the problem.  Thanks a lot.  Does this indicate I have a probl=
em
with the NVRAM that needs to be fixed?

Cyrus



Message text written by INTERNET:foxboro@xxxxxxxxxxxxx
>Cyrus,

I had a similar problem on my AW51B box when the NVRAM had failed.  Check=

the diag-switch? setting from the ok prompt using the following command:
printenv =

The last entry on ours is the diag-switch? and if it is set to true you
will get this.  The default is false.  If this is your case you can set i=
t
back to false by the following:
setenv diag-switch? false  <Enter>.  Then reboot and see if this clears t=
he
problem with the ARP/RARP messages.

Don't know is this is your problem, but it is something to check.

Jim Kahlden
jim.kahlden@xxxxxxxx =

Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
<

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: