Re: [foxboro] AW will not boot ZCP or ATS. Any ideas?

Russ,
My bad! You nailed it-- the ports were firewalled. Not really sure how
or for how long. Perhaps, it was turned back on during the installation
of a Windows security update? Anyway, I'm back in business and I thank
you.

Many thanks to all who took the time to read and/or respond. As always,
the list works!

Thanks,
Dave


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Monday, December 17, 2007 1:40 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AW will not boot ZCP or ATS. Any ideas?

Turn off you hosting station firewaslls..both hardware nics and virtual
miniport

Russ Boulay
Support Engineering Manager (GPS)
Invensys Process Systems
Foxboro, MA, USA 02035
 Telephone:  +1-866-746-6477 (USA, Canada)
                        +1-508-549-2424 (Worldwide)
  E-mail:          ips.csc@xxxxxxxxxxxxxxxx

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of dave.caldwell@xxxxxxxxxxxxxx
Sent: Monday, December 17, 2007 1:33 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AW will not boot ZCP or ATS. Any ideas?

All Knowing List,
Here's a synopsis of a problem I'm having.
Any ideas would be appreciated.
Thanks,
Dave

SYSTEM:=3D3D20
* Mesh Version 8.2

SYSTEM COMPONENTS:=3D3D20
* 36CP01 (ZCP270) (connected to edge sw)
* 01AT23 (ATS in LI mode) (connected to edge sw)
* 30AW02 (Dell PW-340 P-92 Host for ZCP and ATS) =3D3DA0(connected to =
root
=3D
=3D3D
sw)
* Enterasys N-3 Switches DFE Gold blades (one set for root and one set
=3D3D
for edge)

PROBLEM DESCRIPTION:
The system has worked fine for many months. Recently, some maintenance
=3D3D
work was done to the AW host. After this maintenance, the host has been
=3D3D
able to perform all manner of ICC functions for its hosted ZCPs, such as
=3D3D
checkpoint, upload, saveall, etc. However, it appears to have lost its
=3D3D
ability to perform a reboot for hosted stations.=3D3D20

Subsequently, the CP letterbug was changed to NOSUCH, and NVRAM was =
=3D3D
cleared. Next, the CP letterbug was set back to 36CP01. The CP appears
=3D3D
to send out broadcasts, but no response is received back from the host.

Further testing showed that if one asks the ATS to reboot both primary
=3D3D
and shadow at the same time, the sysmon_log shows:
2007-12-17 10:17:29 01AT23 Process =3D3D3D Config check RDHSS=3D3DA0 =
000131
=3D3D=3D

-=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Requesting Stabin
2007-12-17 10:17:44 01AT23 Process =3D3D3D Config Check RDHSS=3D3DA0 =
000131
=3D3D=3D

-=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Config check data not received

The AW does not appear to be responding to requests for STA36CP01.BIN or
=3D3D
STA01AT23.BIN.

Moreover, if you set the ATS letterbug to NOSUCH, and NVRAM is cleared,
=3D3D
then set it back to the previous letterbug of 01AT23... The ATS appears
=3D3D
to send out broadcasts, but no response is received back from the host.

WHAT'S BEEN DONE SO FAR:
* Verified that ENABLE DOWNLOAD and ENABLE ALL REPORTS are selected for
=3D3D
the CP.
* Verified that the host will not boot another module besides the ZCP
=3D3D
(an ATS).
* Verified the host continues to perform ICC functions for other hosted
=3D3D
ZCPs.
* Verified that sldb file shows the AW as the ZCP host.
* Used ds_stasict to verify that the ZCP was in the hosts table.
* Verified that /usr/fox/sp/locks/f36CP01 exists. Never saw =3D3D
/usr/fox/sp/locks/f36CP01- created.
* Used Wireshark to verify that an Ethernet packet was being broadcast
=3D3D
with destination FF:FF:FF:FF from the source MAC address of 36CP01. This
=3D3D
packet was showing up on the wire to the AW host.
* Verified lsap_dsp and romload_svr processes are running on host. =3D3D
Should mles be running? Did not kill and restart, but did reboot AW host
=3D3D
with no change.=3D3D20
* Verified the STA36CP01.BIN and STA01AT23.BIN files exist and had =3D3D
correct configuration information using stabin_tool.exe.

REQUEST:
* Any ideas anyone has to further troubleshoot this problem is =3D3D
appreciated.
* I used the Troubleshooting Guide off the CSC website for CPs. Anyone
=3D3D
got a guide for ZCPs?
 =3D

 =3D

_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 =3D

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
 =3D



* Confidentiality Notice:
This e-mail and any associated files are intended solely for the
individual=3D
 or entity to whom they are addressed. Please do not copy it or use it
for =3D
any purposes, or disclose its contents to any other person. Further,
this e=3D
-mail and any associated files may be confidential and further may be
legal=3D
ly privileged. This email is from the Invensys Process Systems business
uni=3D
t of Invensys plc which is a company registered in England and Wales
with i=3D
ts registered office at Portland House, Bressenden Place, London, SW1E
5BF =3D
(Registered number 166023).  For a list of European legal entities
within t=3D
he Invensys Process Systems business group, please click here
http://www.in=3D
vensys.com/legal/default.asp?top_nav_id=3D3D77&nav_id=3D3D80&prev_id=3D3D=
77.

If you have received this e-mail in error, you are on notice of its
status.=3D
 Please notify us immediately by reply e-mail and then delete this
message =3D
from your system. Thank you for your co-operation. You may contact our
Help=3D
desk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx T=3D
his e-mail and any attachments thereto may be subject to the terms of
any a=3D
greements between Invensys (and/or its subsidiaries and affiliates) and
the=3D
 recipient (and/or its subsidiaries and affiliates).


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: