Re: [foxboro] AW: SavelAll Error

From a save_all script maintainer: Thank you Walter.

From what I understand from the initial post. You are trying to do a
commandline save_all to a floppy?
We have not been very lucky getting this to work unattended, although we did
get it working. As far as I remember we ended up with a lot of files in the
"root" filesystem which we found unacceptable. So we abandoned this route.

The save_all util found in /opt/fox/ciocfg/api will take 2 parameters one of
them is the Station and the other is the path_to_store_the_saveall.
The Save_all scripts found on Cassandra are to my knowledge using that api
utility. I know for sure that ours is. (save_all.sh)

Check that as a first attempt.

Secondly if you insist on writing to a floppy:
When you format a floppy from the commandline, you will need to do a "newfs"
on it afterwards and delete the lost+found directory on it too when
completed. (every directory shows up as a compound, that is why)

From the ICC a save_all with format will (slowly though) take care of that
for you. However when doing a save_all for about a hundred CP's will make
you sick from the large amount of coffee you will consume out of boredom.

Hope this helps


Ron Deen 
Business Development Manager
Invensys Systems N.V.
Baarnsche dijk 10, 3741 LS Baarn, The Netherlands
T: +31 (0)35 54 84 233 M +31 (0)6 53963616 F: +31 (0)35 54 84 175 
Ron.Deen@xxxxxxxxxxxxxxxx / www.invensys-systems.nl
Avantis * Eurotherm * Foxboro * SimSci * Triconex * Wonderware

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Dixon, Walter
Sent: dinsdag 23 augustus 2005 15:27
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AW: SavelAll Error

Why don't you use the save-all script.
http://www.thecassandraproject.org/archive/save_all.html

Since I have installed it I haven't made a single save-all on floppy. =
When you run it more then once, you even get a compressed backup file of =
the last save-all you made.

=20
=20
Met vriendelijke groet / Best regards,
=20
=20
=20
Walter Dixon
Saint-Gobain Isover Benelux B.V.=20
Afdeling Industri=EBle Automatisering
E-mail:      walter.dixon@xxxxxxxxxxxxxxxx
Tel:           +31 (0) 76 50 80 457
Fax:           +31 (0) 76 50 80 335
Internet:   http://www.isover.nl/
-----Oorspronkelijk bericht-----
Van: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =
Namens Sieling, Marcel
Verzonden: dinsdag 23 augustus 2005 15:10
Aan: 'foxboro@xxxxxxxxxxxxx'
Onderwerp: [foxboro] AW: SavelAll Error

Hi,

>Please any advice?=3D20

Save to some empta directory on your hard disk and copy saved files to
floppy in a second step. This should work then. However, I have no
explanation for the phenomenon you're seeing, actually I never tried to
perform a save all directly to floppy because it often happens that the =
=3D
save
all files do not fit on one diskette (when using sequence blocks
intensively, which I often do).

Best regards -

Marcel Sieling
Systems Technologies

Invensys Systems GmbH
Emanuel-Leutze-Str. 11
40547 Duesseldorf
Germany
T: +49-211-5966-302
F: +49-163-99-5966302=3D20
M: +49-163-5966302
Skype:  marcel.sieling
mailto:marcel.sieling@xxxxxxxxxxxxxxxx
http://www.foxboro-deutschland.de

Invensys Anwender Symposium
F=3DFCr Prozess- und Kraftwerksindustrie
21.- 22. September 2005
MARITIM Hotel K=3DF6ln=3D20
Informationen und Registrierung
www.foxboro-deutschland.de/as2005/


> -----Urspr=3DFCngliche Nachricht-----
> Von: foxboro-bounce@xxxxxxxxxxxxx=3D20
> [mailto:foxboro-bounce@xxxxxxxxxxxxx] Im Auftrag von=3D20
> Khudhair, Waleed K
> Gesendet: Dienstag, 23. August 2005 07:33
> An: foxboro@xxxxxxxxxxxxx
> Betreff: [foxboro] SavelAll Error
>=3D20
>=3D20
> Hi all,=3D20
> =3D20
>=3D20
> I failed to saveall a CP thru ICC and command line. The ICC=3D20
> returned an error indicating that the /dev/fd0 can not be=3D20
> mounted. I checked the /dev/fd0 link to rfd0c and to=3D20
> diskette0 and found them broken.  I manually rested the link=3D20
> using the command ln. Even though I was able to get the links=3D20
> fixed I am still unable to saveall. I tried to format the=3D20
> floppy manually using the command fdformat and the system=3D20
> returned an error saying that it can not read from this=3D20
> device. However, I can mount the floppy on /pcfs and copy to=3D20
> it without any problems! Please any advice?=3D20
>=3D20
> =3D20
>=3D20
> Thanks, =3D20
>=3D20
> =3D20
>=3D20
> =3D20
>=3D20
> _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_  =3D20
>=3D20
>     Waleed K. Al-Khudhair
>=3D20
>      Uthmaniyah Gas Plant=3D20
>=3D20
>        Engineering Building=3D20
>=3D20
>            Room 130=3D20
>=3D20
>         DCS Administrator
>=3D20
> Tele   +9663577-5396=3D20
>=3D20
> Pager  +9663870-1474
>=3D20
> eFax   +96638744444 / Ext. 133732
>=3D20
> =3D20
>=3D20
>=3D20
>=3D20
> =3D20
> =3D20
> ______________________________________________________________
> _________
> This mailing list is neither sponsored nor endorsed by=3D20
> Invensys Process Systems (formerly The Foxboro Company). Use=3D20
> the info you obtain here at your own risks. Read=3D20
> http://www.thecassandraproject.org/disclaimer.html
> =3D20
> foxboro=3D20
> mailing list:             http://www.freelists.org/list/foxboro
> to subscribe:        =3D20
> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
> to=3D20
> unsubscribe:      =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
> =3D20
>=3D20

=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: