Re: [foxboro] AIN Block for FBM 231

  • From: "Stankiewicz, Anthony P." <X2STANKI@xxxxxxxxxxxxxx>
  • To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
  • Date: Wed, 4 Jan 2017 19:51:56 +0000

Miten,
As Tom has mentioned, you can, but don't have to add an AIN block. The RIN 
block has "almost" all the same features as the AIN, but, the biggest issue I 
have found is that even though it has alarming capability, it does not have the 
alarm signal out for triggering external blocks with a Boolean bit or use in a 
CALCA block. If you don't use the AIN, then to achieve the Boolean trigger, you 
will need to add REALM blocks. If you have the block count availability, I 
think the AIN off the RIN block I the way to go. Then all your displays and 
such could work directly off the AIN and you would still have a Boolean alarm 
trigger output if needed.

Tony 

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Vandewater, Tom (HI Contractor)
Sent: Wednesday, January 04, 2017 1:47 PM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] AIN Block for FBM 231

Miten,
        The AIN and MAIN blocks can be used but cannot actually read data 
directly from an FDSI Device/Register.  You have to read the data in with a DCI 
block such as an IIN or RIN block and then pass the output out of them to the 
.MEAS parameter of the AIN.  You would only need to do that if you use generic 
AIN faceplates on all your displays or have special signal conditioning or 
alarm conditions not available in an IIN or RIN block.  Those DCI blocks have 
been modified over time to include most of the alarm parameters of an AIN 
block. 

Regards,
Tom VandeWater
Control Conversions, Inc.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of miten thakkar
Sent: Wednesday, January 04, 2017 4:40 AM
To: Gigu Pipriya
Subject: [foxboro] AIN Block for FBM 231

Can AIN block be defined in FBM 231 ? The manual B0700AH manual does not 
include AIN  block or MAIN block as DCI block .
Regards,

Miten Thakkar
Instrument Engineer,
GSFC vadodara


 
 
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric 
(formerly The Foxboro Company).  Use the info you obtain here at your own 
risks.  See the disclaimer at www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:               //www.freelists.org/list/foxboro
to subscribe:           mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:        mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company).  Use the info you obtain here at your own
risks.  See the disclaimer at www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:               //www.freelists.org/list/foxboro
to subscribe:           mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:        mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company).  Use the info you obtain here at your own
risks.  See the disclaimer at www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:               //www.freelists.org/list/foxboro
to subscribe:           mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:        mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: