Re: [foxboro] AIM with InFusion

Marc,

AIM is compatible with Infusion 2.0 and IA 8.5. Steps 3 and 4 could be swapped 
without issue. AIM files are loaded in /opt/aim, there are no files loaded in 
/etc, as far as I know.

Pat Rogers
Senior Service Engineer


 
10900 Equity Drive
Houston, TX 77041
T - 713-329-1719
M - 281-217-2680
New Email Address:
E - pat.rogers@xxxxxxxxxxxx


iom.invensys.com

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Marc Hunter
Sent: Sunday, March 27, 2011 9:00 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AIM with InFusion

All,
We are in process of setting up a demonstration/development test bed with I/A 
version 8.5, AIM, and InFusion 2.0 and our installation order was as listed - 
1) I/A 2) Quick Fixes 3) AIM 3.3.1 4) Infusion 2.0.

I recall that IOM stated InFusion was compliance with AIM, however, when we 
complete the InFusion installation, the historian instance was removed from the 
/etc/ files and AIM is not functional.

Anyone know if AIM is compliant with InFusion?  If it is, did we get the 
installation order correct?

Marc

Marc L. Hunter
Synergy Systems Inc.
hunter@xxxxxxxxxxxxx<mailto:hunter@xxxxxxxxxxxxx>
Office   +1.630.778.1960    ext. 207
Mobile +1.630.248.2838
http://www.synsysinc.com



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys plc, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.

You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject 
to the terms of any agreements between Invensys (and/or its subsidiaries and 
affiliates) and the recipient (and/or its subsidiaries and affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: