Re: [foxboro] ACM trouble

Check for open object manager lists =20

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of BARBER WILLIAM R
Sent: Wednesday, June 21, 2006 8:47 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] ACM trouble

O wise list;

I was alerted to communications errors on 1 of our 3 ACMs by System =3D
Management.
Also some WPs had ACM data smurfed; other WPs seemed to get the data ok.
Ultimately found zero idle time on 2 of the ACMs, the other had reduced
=3D idle time (45%).

Re-booting both the shadow & primary ACMs at the same time from sys =3D
management seems to have cleared all problems & idle time back to ~70%
(re-booted =3D all 3).

Anyone with similar experience?..ideas?

thx
wb


William Barber
Engineering Technician, Sr.
602-236-2562
602-818-0834
wrbarber@xxxxxxxxxx


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: