Re: [foxboro] ACM trouble

 There have been several versions of Quick Fixes for this module over the
years. 
 Try getting the latest version from the Foxboro CSC and install it when
possible.


  Regards,

  Scott

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of BARBER WILLIAM R
Sent: Wednesday, June 21, 2006 8:47 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] ACM trouble

O wise list;

I was alerted to communications errors on 1 of our 3 ACMs by System =
Management.
Also some WPs had ACM data smurfed; other WPs seemed to get the data ok.
Ultimately found zero idle time on 2 of the ACMs, the other had reduced =
idle time (45%).

Re-booting both the shadow & primary ACMs at the same time from sys =
management
seems to have cleared all problems & idle time back to ~70% (re-booted =
all 3).

Anyone with similar experience?..ideas?

thx
wb


William Barber
Engineering Technician, Sr.
602-236-2562
602-818-0834
wrbarber@xxxxxxxxxx


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: