Re: [foxboro] AB30FT and Control Logix PLC

Suzi,

Are you using KF2s and DH+, or KFCs with controlnet?

Regards,
David




At 07:20 AM 6/30/2006, you wrote:
>Hello.
>
>Has anyone set up communication between AB30FT and Control Logix PLC in
>Redundancy configuration ?
>
>AB30FT communicating with only one PLC works fine.. The problem is when
>we have 2 Control Logix.
>
>Has anyone tried this?
>Any other suggestions? The customer is willing to change hardware if
>necessary to keep the original idea that was to have PLC in redundancy
>configuration "talking with" our System.
>
>Thank you
>
>Suzi
>
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: