Re: [foxboro] AB Question

Try this link for AB / PLC questions.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of BrianLong
Sent: Wednesday, November 26, 2008 10:15 AM
To: Foxboro
Subject: [foxboro] AB Question

This is a little off the Foxboro subject but were needing some info on best
practice of setting up a message block (MSG) between two AB PLC5's,  the
info then gets read to the DCS thru a INT30.  We've set up many MSG blocks
in the past but all are done a little bit differently.  Any help would be
appreciated, contact me off list if necessary.

Thanks,
Brian Long
Arkansas Kraft
blong@xxxxxxx



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: