Re: [foxboro] A Sysmon file question

I would suggest to go through the right way, i.e., correct the mistakes in
System Definition and re-install the System Monitor. You will be risking the
SysDef going out of sync with your system by going through these backdoors.

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of David Johnson
Sent: Tuesday, November 16, 2004 2:10 PM
To: Foxboro@xxxxxxxxxxxxx
Subject: [foxboro] A Sysmon file question

Hello all,

I just added several stations to my node and made a mistake in the system 
configuration.  For some reason I forgot to monitor these new stations with 
the system monitor.  Anyone remember which file to "fix" that will allow me 
to put these stations on-line?  I know I have done this in the past, but 
cannot remember the file to edit.

Thanks in advance.

David


PREMIER System Integrators
Phone:  (256) 355-1732
Fax:    (256) 355-9088
Email   David.Johnson@xxxxxxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: