Re: [foxboro] 2nd Ethernet Port

If this Foxboro supplied script from the Power Application folks called
"qc" or quick copy is available for free, can someone please e-mail me a
copy; assume UNIX version?  Thanks ...


Joseph M. Riccardi
DCS Services - Industrial Process Control
 
North-Central Office (OH, PA, MI, IN, WV area)
South-East Office (FL, GA, AL, SC, NC area)

Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A.
Adams

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Jim Kahlden
Sent: Tuesday, May 30, 2006 1:18 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] 2nd Ethernet Port

Steve,

Thanks, that is what I was looking for.  I changed my script like you =
suggested and now I can copy files over the 2nd ethernet port.

Jim

>>> SMurray@xxxxxxxxxx 5/30/2006 8:55:21 AM >>>
Hi Jim,

  I replaced the rmount section in our qc script with the following:
************************************************************************
*
for wp in 1OX1 1OX2 2AP1 2AP2 2CC2 2CC3 3FF1 3FF2 3FFAW2 do
                echo Copying to $wp
                rcp -p $* $wp:$WHERE
done
************************************************************************
**

  The rest of the script is the same as the original qc.

  Each workstation has a list of the other nine workstations.  It can be
a pain to edit each list if you have a lot of workstations, but it only
has = to be done once.

  One of my workstations does not have a second ethernet card, but rcp =
works over the nodebus.

Steve Murray
Asarco


-----Original Message-----
From: Jim Kahlden [mailto:James.Kahlden@xxxxxxxx]=20
Sent: Monday, May 29, 2006 5:41 PM
To: foxboro@xxxxxxxxxxxxx=20
Subject: [foxboro] 2nd Ethernet Port


I have read through some of the archives and see that several have
posted that you can not use rmount on the 2nd Ethernet Port.  I have
been using a Foxboro supplied script from the Power Application folks
called "qc" or quick copy that uses the rmount command to copy displays
around.  I have recently installed a 2nd Ethernet Port and now this
utility no longer works and I assume it is because this script uses this
rmount command.  Have any others had this same experience?  What
commands do you use to copy displays to other stations using the 2nd
Ethernet Port if rmount does not work?

Thanks,


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx=20
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read
http://www.thecassandraproject.org/disclaimer.html=20
=20
foxboro mailing list:
http://www.freelists.org/list/foxboro=20
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
=20
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
=20
------------------------------------------------------------------------
---=
-
----
This e-mail message has been scanned for Viruses and Content=20 and
cleared by MailMarshal. If this is spam please forward=20 this message
to spam@xxxxxxxxxx so that we may evaluate it=20 and block future
messages.
------------------------------------------------------------------------
---=
-
----

*

This e-mail and any files transmitted with it are the property of ASARCO
= LLC and/or its affiliates, are confidential, and are intended solely
for = the use of=20 the individual or entity to whom this e-mail is
addressed. If you are not = a named recipient or otherwise have reason
to believe that you have = received this message in error,=20 please
notify the sender and delete this message immediately from your =
computer. Any other use, retention, dissemination forwarding, printing
or = copying of this e-mail is=20 strictly prohibited.  Although this
email and any attachments are believed = to be free of any virus or
other defect that might affect any computer = system into which it is=20
received, and opened, it is the responsibility of the recipient to
ensure = that it is virus free and no responsibility is accepted by
ASARCO LLC = and/or its=20 affiliates for any loss or damage arising in
any way from its use

This e-mail has been scanned and cleared by MailMarshal=20
www.marshalsoftware.com=20

*
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read
http://www.thecassandraproject.org/disclaimer.html=20
=20
foxboro mailing list:
http://www.freelists.org/list/foxboro=20
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
=20
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: