Re: [foxboro] 2nd Ethernet Port

Steve,

Thanks, that is what I was looking for.  I changed my script like you =
suggested and now I can copy files over the 2nd ethernet port.

Jim

>>> SMurray@xxxxxxxxxx 5/30/2006 8:55:21 AM >>>
Hi Jim,

  I replaced the rmount section in our qc script with the following:
*************************************************************************
for wp in 1OX1 1OX2 2AP1 2AP2 2CC2 2CC3 3FF1 3FF2 3FFAW2
do
                echo Copying to $wp
                rcp -p $* $wp:$WHERE
done
**************************************************************************

  The rest of the script is the same as the original qc.

  Each workstation has a list of the other nine workstations.  It can be a
pain to edit each list if you have a lot of workstations, but it only has =
to
be done once.

  One of my workstations does not have a second ethernet card, but rcp =
works
over the nodebus.

Steve Murray
Asarco


-----Original Message-----
From: Jim Kahlden [mailto:James.Kahlden@xxxxxxxx]=20
Sent: Monday, May 29, 2006 5:41 PM
To: foxboro@xxxxxxxxxxxxx=20
Subject: [foxboro] 2nd Ethernet Port


I have read through some of the archives and see that several have posted =
=3D
that you can not use rmount on the 2nd Ethernet Port.  I have been using a =
=3D
Foxboro supplied script from the Power Application folks called "qc" or =
=3D
quick copy that uses the rmount command to copy displays around.  I have =
=3D
recently installed a 2nd Ethernet Port and now this utility no longer =3D
works and I assume it is because this script uses this rmount command.  =
=3D
Have any others had this same experience?  What commands do you use to =3D
copy displays to other stations using the 2nd Ethernet Port if rmount does =
=3D
not work?

Thanks,


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx=20
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html=20
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro=20
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
=20
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
=20
---------------------------------------------------------------------------=
-
----
This e-mail message has been scanned for Viruses and Content=20
and cleared by MailMarshal. If this is spam please forward=20
this message to spam@xxxxxxxxxx so that we may evaluate it=20
and block future messages.
---------------------------------------------------------------------------=
-
----

*

This e-mail and any files transmitted with it are the property of ASARCO =
LLC and/or its affiliates, are confidential, and are intended solely for =
the use of=20
the individual or entity to whom this e-mail is addressed. If you are not =
a named recipient or otherwise have reason to believe that you have =
received this message in error,=20
please notify the sender and delete this message immediately from your =
computer. Any other use, retention, dissemination forwarding, printing or =
copying of this e-mail is=20
strictly prohibited.  Although this email and any attachments are believed =
to be free of any virus or other defect that might affect any computer =
system into which it is=20
received, and opened, it is the responsibility of the recipient to ensure =
that it is virus free and no responsibility is accepted by ASARCO LLC =
and/or its=20
affiliates for any loss or damage arising in any way from its use

This e-mail has been scanned and cleared by MailMarshal=20
www.marshalsoftware.com=20

*
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html=20
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro=20
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
=20
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: