Re: [foxboro] 2nd Ethernet Port

Hi Jim,

  I replaced the rmount section in our qc script with the following:
*************************************************************************
for wp in 1OX1 1OX2 2AP1 2AP2 2CC2 2CC3 3FF1 3FF2 3FFAW2
do
                echo Copying to $wp
                rcp -p $* $wp:$WHERE
done
**************************************************************************

  The rest of the script is the same as the original qc.

  Each workstation has a list of the other nine workstations.  It can be a
pain to edit each list if you have a lot of workstations, but it only has to
be done once.

  One of my workstations does not have a second ethernet card, but rcp works
over the nodebus.

Steve Murray
Asarco


-----Original Message-----
From: Jim Kahlden [mailto:James.Kahlden@xxxxxxxx]
Sent: Monday, May 29, 2006 5:41 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] 2nd Ethernet Port


I have read through some of the archives and see that several have posted =
that you can not use rmount on the 2nd Ethernet Port.  I have been using a =
Foxboro supplied script from the Power Application folks called "qc" or =
quick copy that uses the rmount command to copy displays around.  I have =
recently installed a 2nd Ethernet Port and now this utility no longer =
works and I assume it is because this script uses this rmount command.  =
Have any others had this same experience?  What commands do you use to =
copy displays to other stations using the 2nd Ethernet Port if rmount does =
not work?

Thanks,


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 
----------------------------------------------------------------------------
----
This e-mail message has been scanned for Viruses and Content 
and cleared by MailMarshal. If this is spam please forward 
this message to spam@xxxxxxxxxx so that we may evaluate it 
and block future messages.
----------------------------------------------------------------------------
----

*

This e-mail and any files transmitted with it are the property of ASARCO LLC 
and/or its affiliates, are confidential, and are intended solely for the use of 
the individual or entity to whom this e-mail is addressed. If you are not a 
named recipient or otherwise have reason to believe that you have received this 
message in error, 
please notify the sender and delete this message immediately from your 
computer. Any other use, retention, dissemination forwarding, printing or 
copying of this e-mail is 
strictly prohibited.  Although this email and any attachments are believed to 
be free of any virus or other defect that might affect any computer system into 
which it is 
received, and opened, it is the responsibility of the recipient to ensure that 
it is virus free and no responsibility is accepted by ASARCO LLC and/or its 
affiliates for any loss or damage arising in any way from its use

This e-mail has been scanned and cleared by MailMarshal 
www.marshalsoftware.com

*
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: